Foam Bath (Pre-Treat If Needed):
We start by foaming the entire vehicle's exterior and pre-treat any stubborn stains or areas with specialized cleaning products if necessary.
Bugs & Bird Poop Removal:
We carefully remove any bugs and bird droppings from the car's surface, using appropriate cleaning tools to avoid scratching the paint.
3 Bucket Wash:
We use the 3 bucket method: one with soapy water, one with clean rinse water, and one for wheels and tires. We wash the car section by section, starting from the top and working your way down. After that, we rinse the wash mitt or microfiber in the clean water bucket frequently to prevent dirt from going back onto the car.
Iron Removal Treatment:
We apply an iron remover product to dissolve and remove iron contaminants from the paint's surface.
Clay Bar Treatment:
We use a clay bar to gently remove any remaining embedded contaminants from the paint and to ensure the surface is smooth before proceeding.
Wheels Deep Cleaning:
Focused on cleaning the wheels and rims. We use wheel brushes and appropriate cleaning agents to remove brake dust and grime.
Tire Dressing:
We apply the tire dressing to give the tires a clean, glossy look, ensuring that the dressing is a non-sling formula to prevent it from splattering onto the car's body.
Air Blower & Microfiber Towel Dry:
We use an air blower to remove excess water from crevices and hard-to-reach areas. Follow up is done with a microfiber towel to dry the car's exterior completely.
Paint Correction (with Buffer Polisher):
We assess the paint for swirls or imperfections using a buffer polisher to apply car polish with an applicator pad. Then, we buff off with a microfiber towel for enhanced clarity.
Graphene Application:
We apply small amounts of the graphene-infused ceramic coating using an applicator pad in sections (allow the coating to dwell for the specified time).
Using a clean, dry microfiber towel we level the coating and wipe the surface to remove excess product. After that, we repeat the process by applying coating section by section. Always working efficiently to avoid drying before leveling. Some coatings may require 24 hours or more for curing time.
Post-Care:
Avoid washing for a specified curing period. Use pH-neutral car wash soap for future maintenance. Ask our team for recommendations.
